Skip to content

Can Micro Atx Fit In Atx Case?

Can micro atx fit in atx case? This is a common question among first-time pc builders. The answer is yes, micro atx can fit in atx case.

The only difference is that atx case is designed to fit micro atx motherboard. If you’re looking to upgrade your motherboard, you don’t need to buy a new case.

One of the most common questions we get asked is whether a microATX motherboard will fit in a standard ATX case. The answer is usually yes, but there are a few things you need to check before you make your purchase. First, take a look at the dimensions of the microATX motherboard.

It should be no larger than 9.6 inches by 9.6 inches. If it is, then it will not fit in a standard ATX case. Next, take a look at the location of the mounting holes.

They should line up with the standoffs in the ATX case. If they don’t, then you will need to use longer screws or move the standoffs. Finally, check the clearance around the ports on the back of the motherboard.

In some cases, the ports may protrude past the edge of the case, which can cause problems with cable management.

can micro atx fit in atx case?


Can all cases fit micro ATX?

No, not all cases can fit micro ATX. Micro ATX is a smaller form factor than ATX, so some cases that are designed for ATX may not be able to fit micro ATX. However, there are many cases on the market that are designed to fit both ATX and micro ATX.

Can a micro ATX fit in a full tower?

No, a micro ATX will not fit in a full tower. A full tower is designed to accommodate an ATX motherboard, which is larger than a micro ATX motherboard. If you try to install a micro ATX motherboard in a full tower case, it will not fit properly and the case will not be able to close.

How to fit ATX motherboard in a Micro ATX case

Micro atx in atx case reddit

Assuming you’re asking about using a microATX motherboard in an ATX case: MicroATX is a smaller form factor than ATX, so it will fit in an ATX case. However, there are a few things to keep in mind.

First, not all ATX cases will have enough room for a microATX board. Specifically, you need to make sure that the case has enough room for the board’s I/O shield. Second, you may need to make some modifications to the case to get everything to fit.

This could involve removing drive bays, or even cutting out part of the case. Third, you’ll need to make sure that all of the case’s ventilation openings line up with the appropriate openings on the microATX board. Overall, it’s not too difficult to use a microATX board in an ATX case, but there are a few things to keep in mind.

Micro atx case

When it comes to choosing a PC case, there are several different form factors to choose from. One popular option is the micro ATX case. As the name suggests, micro ATX cases are smaller than standard ATX cases, making them a good option for space-saving builds.

Micro ATX cases typically have fewer expansion slots and drive bays than standard ATX cases, but they can still accommodate all the essential components for a fully functioning PC. If you’re looking to build a budget-friendly or compact PC, a micro ATX case is a great option. Here are a few things to keep in mind when shopping for a micro ATX case:

– Make sure the case has enough space for all the components you want to install. Micro ATX cases are smaller than standard ATX cases, so they may not have as much room for expansion. – Check the case’s compatibility with your motherboard.

How to install micro atx motherboard in atx case

Assuming you have all the necessary parts and tools, installing a microATX motherboard into an ATX case is a relatively straightforward process. Just follow these simple steps and you’ll have it up and running in no time. 1. Begin by removing the side panel of the case.

This will give you access to the inside of the case and all the mounting points. 2. Next, locate the standoffs that correspond to the holes in your microATX motherboard. These standoffs will be used to secure the motherboard to the case.

3. Once you have located the standoffs, use a screwdriver to screw them into the appropriate mounting points in the case. 4. Now it’s time to place the motherboard into the case. Be careful to align the motherboard with the standoffs so that the screw holes line up.

Best micro atx case

There are a lot of different micro atx cases out there to choose from. So, which one is the best? Well, it really depends on what you’re looking for.

If you want a case that’s small and compact, then you might want to consider a micro atx case. On the other hand, if you’re looking for a case that’s more spacious and has more features, then you might want to consider a mid-tower or full-tower case. Ultimately, it comes down to personal preference.

But if you’re looking for our recommendation, we think the best micro atx case is the Thermaltake Core V1. It’s a great case that’s small and compact, but still has plenty of room for all your components. Plus, it comes with a bunch of features that other micro atx cases don’t have, like a built-in fan controller and a tempered glass side panel.


MATX is a versatile form factor for motherboards that allows for a wide range of options when it comes to choosing the right motherboard for your needs. MATX motherboards are available in a variety of sizes, from mini-ITX to full-size ATX, and can be equipped with a wide range of features to suit your needs. Whether you’re looking for a simple and compact motherboard for a basic desktop PC, or a high-end board with all the bells and whistles for a gaming rig, there’s a MATX motherboard out there to suit your needs.

Nzxt micro atx case

NZXT is a company that produces computer hardware, including PC cases. The micro atx case is a type of case produced by NZXT. Micro atx cases are designed to fit smaller motherboards, including micro atx and mini itx boards.

NZXT micro atx cases are available in a variety of colors and styles, and they offer features such as cable management and dust filters.

Best atx case

An ATX case is a great way to protect your computer components. It is also a great way to keep your computer components cool. The best ATX cases will have good ventilation and plenty of space for your components.

They will also be easy to work with and easy to install.

Matx vs atx case size

There are two main types of computer cases: matx and atx. Matx cases are smaller in size, while atx cases are larger. Both types of cases have their own advantages and disadvantages.

Matx cases are typically cheaper and easier to transport than atx cases. They also tend to have better airflow, which is important for keeping your computer cool. However, matx cases can be more difficult to work with, and they don’t offer as much space for expansion.

Atx cases are more expensive, but they offer more space for expansion and better cable management. They’re also easier to work with, making them a good choice for those who are new to building computers. However, atx cases can be more difficult to transport and have worse airflow than matx cases.

So, which type of case is right for you? It depends on your needs.


Can micro atx fit in atx case? The answer is yes, micro atx can fit in atx cases. The only difference is that micro atx cases are slightly smaller.

That means that you’ll have less room for expansion cards and drives, but it shouldn’t be a problem if you’re only using a few of each.

Leave a Reply

Your email address will not be published.